CROSBY G209 & G213
TEL 01784 464447    FAX 01784 454788   

           Home Up Feedback Contents Search

 

PRODUCTS

SERVICES
SCREW PIN

G-209  S-209

Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271D Type IVA, Grade A, Class 2, except for those provisions required of the contractor.
     
Working Load Limit permanently shown on every shackle.
Forged - Quenched and Tempered, with alloy pins.
Capacities 1/3 thru 55 tons.
Look for the Red Pin™ . . . the mark of genuine Crosby quality.
Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order.
Hot Dip galvanized or Self Colored.
Fatigue rated.

 
ROUND PIN

G-213  S-213

Round pin anchor shackles meet the performance requirements of Federal Specification RR-C-271D Type IVA, Grade A, Class 1, except for those provisions required of the contractor.
Nominal Size
(in.)		 Working Load Limit *
(tons)		 Stock No. Weight Each
(lbs.)
G-209
Galv.		 S-209
S.C.		 G-213
Galv.		 S-213
S.C.		 G-209
S-209		 G-213
S-213
3/16 † 1/3 1018357 — — — .06 —
1/4 1/2 1018375 1018384 1018017 1018026 .10 .13
5/16 3/4 1018393 1018400 1018035 1018044 .19 .18
3/8 1 1018419 1018428 1018053 1018062 .31 .29
7/16 1-1/2 1018437 1018446 1018071 1018080 .38 .38
1/2 2 1018455 1018464 1018099 1018106 .72 .71
5/8 3-1/4 1018473 1018482 1018115 1018124 1.37 1.50
3/4 4-3/4 1018491 1018507 1018133 1018142 2.35 2.32
7/8 6-1/2 1018516 1018525 1018151 1018160 3.62 3.49
1 8-1/2 1018534 1018543 1018179 1018188 5.03 5.00
1-1/8 9-1/2 1018552 1018561 1018197 1018204 7.41 6.97
1-1/4 12 1018570 1018589 1018213 1018222 9.50 9.75
1-3/8 13-1/2 1018598 1018605 1018231 1018240 13.53 13.25
1-1/2 17 1018614 1018623 1018259 1018268 17.20 17.25
1-3/4 25 1018632 1018641 1018277 1018286 27.78 29.46
2 35 1018650 1018669 1018295 1018302 45.00 45.75
2-1/2 †55 1018678 1018687 — — 85.75 —
G-209

G-213

 

Nominal
Size
(in.)		 Working
Load
Limit *
(tons)		 Dimensions
(in.)		 Tolerance
+ / -
A B C D E F G H L M N P C A
3/16 † 1/3 .38 .25 .88 .19 .60 .56 .98 1.47 .16 1.12 — .19 .06 .06
1/4 1/2 .47 .31 1.13 .25 .78 .61 1.28 1.84 .19 1.38 1.34 .25 .06 .06
5/16 3/4 .53 .38 1.22 .31 .84 .75 1.47 2.09 .22 1.66 1.59 .31 .06 .06
3/8 1 .66 .44 1.44 .38 1.03 .91 1.78 2.49 .25 2.03 1.86 .38 .13 .06
7/16 1-1/2 .75 .50 1.69 .44 1.16 1.06 2.03 2.91 .31 2.38 2.13 .44 .13 .06
1/2 2 .81 .63 1.88 .50 1.31 1.19 2.31 3.28 .38 2.69 2.38 .50 .13 .06
5/8 3-1/4 1.06 .75 2.38 .63 1.69 1.50 2.94 4.19 .44 3.34 2.91 .69 .13 .06
3/4 4-3/4 1.25 .88 2.81 .75 2.00 1.81 3.50 4.97 .50 3.97 3.44 .81 .25 .06
7/8 6-1/2 1.44 1.00 3.31 .88 2.28 2.09 4.03 5.83 .50 4.50 3.81 .97 .25 .06
1 8-1/2 1.69 1.13 3.75 1.00 2.69 2.38 4.69 6.56 .56 5.07 4.53 1.06 .25 .06
1-1/8 9-1/2 1.81 1.25 4.25 1.16 2.91 2.69 5.16 7.47 .63 5.59 5.13 1.25 .25 .06
1-1/4 12 2.03 1.38 4.69 1.29 3.25 3.00 5.75 8.25 .69 6.16 5.50 1.38 .25 .06
1-3/8 13-1/2 2.25 1.50 5.25 1.42 3.63 3.31 6.38 9.16 .75 6.84 6.13 1.50 .25 .13
1-1/2 17 2.38 1.63 5.75 1.54 3.88 3.63 6.88 10.00 .81 7.35 6.50 1.62 .25 .13
1-3/4 25 2.88 2.00 7.00 1.84 5.00 4.19 8.86 12.34 1.00 9.08 7.75 2.25 .25 .13
2 35 3.25 2.25 7.75 2.08 5.75 4.81 9.97 13.68 1.22 10.34 8.75 2.40 .25 .13
2-1/2 †55 4.13 2.75 10.50 2.71 7.25 5.69 12.87 17.84 1.38 13.00 — 3.13 .25 .25

†   Furnished in screw pin only.
*   NOTE:  Maximum Proof Load is 2.2 times the Working Load Limit.  Minimum Ultimate Strength is 6 times the Working Load Limit. 

 

                       

CROSBY G209 & G213   

[ Home ] [ Up ]                                              

Copyright © 2003 Splicing & Allied Services Co Ltd
Last modified: November 19, 2003