G2130 & G2150
TEL 01784 464447    FAX 01784 454788   

           Home Up Feedback Contents Search

 

PRODUCTS

SERVICES

BOLT TYPE
ANCHOR SHACKLE

G-2130
S-2130

Bolt Type Anchor shackles with thin head bolt — nut with cotter pin.  Meets the performance requirements of Federal Specification RR-C-271D Type IVA, Grade A, Class 3, except for those provisions required of the contractor.
Working Load Limit permantently shown on every shackle.   Capacities 1/3 thru 150 tons.
Forged — Quenched and Tempered, with alloy pins.
Look for the Red Pin™ . . . the mark of genuine Crosby quality.
Shackles 55 tons and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification.
Certification must be requested at time of order.
Shackles 85 tons and larger can be provided as follows.
Non Destructive Tested
Serialized Pin and Bow
Material Certification
(Chemical) Certification must be requested at time of order.
Hot Dip galvanized or Self Colored.
Fatigue rated.

BOLT TYPE
CHAIN SHACKLE

G-2150
S-2150

Bolt Type Chain shackles. Thin hex head bolt — nut with cotter pin.  Meets the performance requirements of Federal Specification RR-C271D Type IVB, Grade A, Class 3, except for those provisions required of the contractors.



      

    
Nominal Shackle
Size
(in.)		 Working Load Limit * (tons) Stock No. 2130
Weight Each
(lbs.)		 2150
Weight Each
(lbs.)
G-2130
Galv.		 S-2130
S.C.		 G-2150
Galv.		 S-2150
S.C.
3/16 1/3‡ 1019464 — — — .06 —
1/4 1/2 1019466 — 1019768 — .11 .13
5/16 3/4 1019468 — 1019770 — .22 .23
3/8 1 1019470 — 1019772 — .33 .33
7/16 1-1/2 1019471 — 1019774 — .49 .49
1/2 2 1019472 1019481 1019775 1019784 .79 .75
5/8 3-1/4 1019490 1019506 1019793 1019800 1.68 1.47
3/4 4-3/4 1019515 1019524 1019819 1019828 2.72 2.52
7/8 6-1/2 1019533 1019542 1019837 1019846 3.95 3.85
1 8-1/2 1019551 1019560 1019855 1019864 5.66 5.55
1-1/8 9-1/2 1019579 1019588 1019873 1019882 8.27 7.60
1-1/4 12 1019597 1019604 1019891 1019908 11.71 10.81
1-3/8 13-1/2 1019613 1019622 1019917 1019926 15.83 13.75
1-1/2 17 1019631 1019640 1019935 1019944 20.80 18.50
1-3/4 25 1019659 1019668 1019953 1019962 33.91 31.40
2 35 1019677 1019686 1019971 1019980 52.25 46.75
2-1/2 55 1019695 1019702 1019999 1020004 98.25 85.00
3 † 85 1019711 — 1020013 — 154.00 124.25
3-1/2 †120 ‡ 1019739 — — — 265.00 —
4 †150 ‡ 1019757 — — — 338.00 —
2130
2150

 

Nominal
Shackle
Size
(in.)		 Working
Load Limit *
(tons)		 Dimensions
(in.)		 Tolerance
A B C D E F G H K L M N P R C&G A
3/16 1/3‡ .38 .25 .88 .19 .60 .56 — 1.47 — .98 — .19 1.29 — .06 .06
1/4 1/2 .47 .31 1.13 .25 .78 .61 .75 1.84 1.59 1.28 .97 .25 1.56 .25 .06 .06
5/16 3/4 .53 .38 1.22 .31 .84 .75 1.00 2.09 1.91 1.47 1.16 .31 1.82 .31 .06 .06
3/8 1 .66 .44 1.44 .38 1.03 .91 1.22 2.49 2.30 1.78 1.41 .38 2.17 .38 .13 .06
7/16 1-1/2 .75 .50 1.69 .44 1.16 1.06 1.42 2.91 2.66 2.03 1.62 .44 2.51 .44 .13 .06
1/2 2 .81 .63 1.88 .50 1.31 1.19 1.63 3.28 3.03 2.31 1.81 .50 2.80 .50 .13 .06
5/8 3-1/4 1.06 .75 2.38 .63 1.69 1.50 2.00 4.19 3.75 2.94 2.31 .69 3.53 .63 .13 .06
3/4 4-3/4 1.25 .88 2.81 .75 2.00 1.81 2.38 4.97 4.53 3.50 2.75 .81 4.07 .81 .25 .06
7/8 6-1/2 1.44 1.00 3.31 .88 2.28 2.09 2.81 5.83 5.33 4.03 3.19 .97 4.71 .97 .25 .06
1 8-1/2 1.69 1.13 3.75 1.00 2.69 2.38 3.19 6.56 5.94 4.69 3.69 1.06 5.31 1.00 .25 .06
1-1/8 9-1/2 1.81 1.25 4.25 1.13 2.91 2.69 3.58 7.47 6.78 5.16 4.06 1.25 5.90 1.25 .25 .06
1-1/4 12 2.03 1.38 4.69 1.25 3.25 3.00 3.94 8.25 7.50 5.75 4.53 1.38 6.51 1.38 .25 .06
1-3/8 13-1/2 2.25 1.50 5.25 1.38 3.63 3.31 4.38 9.16 8.28 6.38 5.00 1.50 7.21 1.50 .25 .13
1-1/2 17 2.38 1.63 5.75 1.50 3.88 3.63 4.81 10.00 9.06 6.88 5.38 1.62 7.73 1.62 .25 .13
1-3/4 25 2.88 2.00 7.00 1.75 5.00 4.19 5.75 12.34 10.97 8.86 6.38 2.25 9.05 2.12 .25 .13
2 35 3.25 2.25 7.75 2.00 5.75 4.81 6.75 13.68 12.28 9.97 7.25 2.40 10.41 2.00 .25 .13
2-1/2 55 4.13 2.75 10.50 2.62 7.25 5.69 8.00 17.84 14.84 12.87 9.38 3.13 13.56 2.62 .25 .25
3 †   85   5.00 3.25 13.00 3.00 7.88 6.50 8.50 21.50 16.88 14.36 11.00 3.62 16.50 3.50 .25 .25
3-1/2 † 120 ‡ 5.25 3.75 14.63 3.62 9.00 8.00 — 24.63 — 16.50 — 4.12 19.00 — .25 .25
4 † 150 ‡ 5.50 4.25 14.50 4.10 10.00 9.00 — 25.69 — 18.42 — 4.56 19.75 — .25 .25
 

                       

G2130 & G2150   

[ Home ] [ Up ]                                              

Copyright © 2003 Splicing & Allied Services Co Ltd
Last modified: December 17, 2003